Since we didn’t get out on the dirt bikes at all last year, I’m determined to go up to MotoPark at least once this year. The older kids are both over 18 so I don’t need to provide bikes and equipment etc for them, I’d love for them to come […]
2007 YZ250F
KYB Fork Protector
One of the fork protectors was missing off the 2007 YZ250F and they are about $25 for a new one. I figured I’d design and print one and see if it would stay in place on the track. Quick model drawn up in Onshape. Printed in PLA for now simply […]
Yamaha KYB Fork Cap Tools
I needed to replace the fork seals on my 07 YZ250F and didn’t have the special wrench for undoing the fork caps so I designed this tool to be 3D printed. It took a few iterations to get the design strong enough but I was successfully able to loosen both […]
Dirt Bike – Repair Dent in Exhaust
2 Stroke Through a recent trade, a KTM 125sx was acquired with a huge dent in the exhaust. Dents like this, not usually as bad are very common on these exhaust expansion chambers and while the bike might seem to run ok, a dent this size must be having an adverse […]