I picked this up for the little guy, looks to be in good shape. The clutch bites late so it might need new plates and it has a DEP exhaust that makes the power band a bit too vicious for him to learn clutch and gears with so I’ll try […]
MTOAdmin
2011 Nissan Juke SL
1.6L direct injection turbo 190HPFront wheel drive5 doors 6 speed manual2960 lbs5 seats Josh was looking for a car but when I saw this going for a good price, my family convinced me to jump on it and give Josh the Golf GTI. It has 250,000 Kms but the seller […]
2010 Suzuki RM-Z 250 – Sold
Just picked this up (Jan 2019), really wasn’t sure about getting another 4 stroke but couldn’t find a nice 2 stroke and got a great deal on this. Notes RM-Z 250 parts list and exploded diagramsJun 2019Race sag = 98mm, static sag = 46mm – static sag is too high, […]
2013 Oset 20.0 Electric Trials Bike
Saw this on Kijiji and thought it would be good for us all to play with and even for the wife to use as a pit bike at the MX track. Sadly when I got it home I found that most of the stuff I was told about it was […]
6×10 Enclosed Trailer
We’re planning on frequent visits to the track this year and I wanted to be able to transport all 4 dirt bikes and keep all the riding gear out of the rain. We rented an open trailer from U-Haul last summer when we went camping but it was only 5’x8′ […]
KYB Fork Protector
One of the fork protectors was missing off the 2007 YZ250F and they are about $25 for a new one. I figured I’d design and print one and see if it would stay in place on the track. Quick model drawn up in Onshape. Printed in PLA for now simply […]
48mm Fork Seal Sliders
Coincidentally, both sets of forks on my dirt bikes were 48mm and both needed new seals. I drew up these seal sliders incorporating a groove in the OD that was intended for a tie wrap to hold the two halves together. Most often these are made from metal that has […]
3D Printer Plate Setup
In this article I’ll go over a few things I learned while setting up a Prusa style 3D printer, probably a lot of stuff will relate to other printers as well. Once you have your printer built (if it was a kit) and running, the first and perhaps most important […]
KTM Shock Spring Adjust Tool
After the success with the fork cap wrench I figured that I might be able to make a strong enough tool to adjust the rear shock spring, when setting the sag for example. The first tool was a little bit long so the end would foul the airbox and the […]
3D Printing
What is 3D printing? Basically this involves building a 3D shape by building up layers of material. The material is most often a plastic (PLA, ABS) filament that is extruded through a heated nozzle but all sorts of materials can be used including filament fused with wood or aluminum. When […]